If you have a fire or water emergency, please call us now at (412) 672-5400

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

'Tis the Season for Fire Damages in Metro Pittsburgh

11/21/2016 (Permalink)

Don't let a fire ruin your holiday spirit- Call SERVPRO Metro Pitt to cleanup & restore.

Smoke residue comes in different varieties, and some are easier to clean than others. Dry, wet, protein and fuel oil smoke residues are all important to know how to remove. Take the guesswork out of cleaning and restoring your fire damaged property in South Knoxville by hiring our expertly trained technicians today. We're here to help you through the situation and return your property to its pre-damage condition. Our SERVPRO technicians understand that as a fire progresses through its stages, it can produce both wet and dry smoke. A different cleaning approach is needed to handle each type of residue left over by an event.

The smoke residue left behind depends on the rate of combustion, the amount of oxygen and kind of material or substance that burns throughout the entire fire. While we understand that if the event is fast-burning and oxygen-rich, it will produce dry smoke, while the fire is oxygen-starved, it will produce slow-burning, smoldering wet smoke. Natural Materials such as wood, paper, cork and other natural fibers create dry, small powdery residues that don't smear. However, synthetic materials like plastic and rubber often produce large easily-smeared particles.

SERVPRO technicians are trained to determine the conditions of a dry versus wet smoke event and apply the proper cleaning procedures to handle each particular situation.

Cleaning Dry Smoke Residues - These types of residues can be easier to clean. Dry smoke only contains a few aerosols that deposit small, dry particles on surface areas and usually don't stain as deeply as wet smoke. Meaning that the residues and odors left behind by dry smoke take less aggressive cleaning tactics to remove. However, dry smoke fires tend to burn hotter and therefore cause more heat damage than others do.

Cleaning Wet Smoke Residues - This type of residue consists of a large concentration of aerosols including varnishes, solvents, and other liquids. With these slow-burning fires, air currents aren't as high and give the wet smoke more time to creep into crevices and small enclosed areas that typically avoid damage in faster-burning fires.

We often run into circumstances at SERVPRO where many items exposed to wet smoke aren't restorable even though damage appears minimal. The aerosols end up penetrating surfaces and are absorbed into different materials, leaving large black particles behind and stripping stained finishes. Taking a minute to understand the possible reasons behind the causes of losing items in a fire is only one reason to hire us. We take a lot of pride in the work that we do for you and want to assist you during this trying time. Contact SERVPRO of Metro Pittsburgh (412) 672-5400 

Other News

View Recent Posts